How to switch from IDE AHCI in Windows 10

How to switch from IDE AHCI in Windows 10 -

If you installed Windows 10 with the disk controller set IDE mode in the BIOS, you can not go directly to AHCI and hope that Windows will function properly. Once you change the BIOS, Windows 10 does not boot. To avoid this, you must follow the instructions in this article.

This operation is very simple and does not require editing the registry or other complex tasks. You must do the following

1. Add "Windows 10 safe mode" boot loader as described in the following articles :.
   • How to add safe mode in the start menu in Windows 10 and Windows 8.
   • Start Windows 10 in Safe Mode

   

2. once you have done this, restart your PC and see if the Safe the element mode works as expected by actually starting again in Safe Mode
3. now, reboot and press any is the key to your PC needs to enter the BIOS -. F2 F10 Del or whatever - it will be mentioned somewhere. Change the mode of IDE to AHCI disk controller.
4. Save the BIOS settings and start Windows 10 in Safe Mode.
5. After Windows 10 starts in Safe Mode, restart it and start as usual. It should start without any problems in AHCI mode.

If this does not work, you can switch the controller to IDE mode and apply a registry tweak mentioned in the "Switch IDE AHCI after installing Windows 7 or Windows 8 "article.
There.

Tweet